Type 2
The glulam frame consists in its easiest and most commonly form of freely installed double supported beams on columns. The column and beam system is easy to assemble and requires no particular experience of construction work. An ordinary loader is usually enough to lift the construction elements in place. A suitable building width is about 15-35 meters.


Type 5
An uncomplicated and easy assembled frame, usually with a span width up to 24 meters. Roof angle 3-6 degrees. A suitable building width is about 10-25 meters.


Type 7
A natural choice when looking for large span widths up to 60 meters with a few number of supporting columns. Suitable roof angel is 3-7 degrees. As an alternative to the added beam in the center section, a trussbeam can be used to ease the installing of ventilation for example.

Read more about glulam frames here


Type 3
A construction with a beam and ridge system requires a site-built stud wall alternatively a form of element wall. This frame type is even easier to assemble than frame type 2. The construction is especially suitable for cold halls and buildings since it is very easy to build an effective moisture barrier in the roof. The frame type also facilitates the insulation. A suitable building width is about 12-30 meter.


Type 6
A trussbeam is a system of trusses connected in ties into a bearing construction. Wooden trussbeams are usually used as freely installed double supported beams. A glulam trussbeam is an aesthetic appealing construction with advantages in the installation of the ventilation through the roof frame for example, and it also offers many options of roof angles. A suitable building width is about 20 meters and wider.